Stack Layout Example for Blazor

Nevron NOV Diagram for Blazor ships with hundreds of examples with full source code, as part of the Nevron Open Vision Suite. All Blazor Diagram examples are also available as a stand-alone Visual Studio solution in C#, which you can download from the links below.

Stack Layout Example for Blazor Description

The stack layout is a directed constrained cells layout, which stacks the cells in horizontal or vertical order. Depending on the layout direction the layout is constrained by either width or height.

The most important properties of this layout are:

  • Direction - determines the direction in which the layout arranges adjacent cells.
  • HorizontalContentPlacement and VerticalContentPlacement - determine the default placement of the cell content in regards to the X or the Y dimension of the cell bounds.
  • HorizontalSpacing and VerticalSpacing - determine the minimal spacing between 2 cells in horizontal and vertical direction respectively.
  • FillMode - when the size of the content is smaller than the container size the FillMode property is taken into account. Possible values are:
    • None - no filling is performed
    • Equal - all shapes are equally inflated
    • Proportional - shapes are inflated proportionally to their size
    • First - shapes are inflated in forward order until content fills the area
    • Last - shapes are inflated in reverse order until content fills the area
    In all cases the maximal size constraints of each shape are not broken.
  • FitMode - when the size of the content is larger than the container size the FitMode property is taken into account. Possible values are:
    • None - no fitting is performed
    • Equal - all shapes are equally deflated
    • Proportional - shapes are deflated proportionally to their size
    • First - shapes are deflated in forward order until content fits the area
    • Last - shapes are deflated in reverse order until content fits the area
    In all cases the minimal size constraints of each shape are not broken.

To experiment with their behavior just change the properties of the layout in the property grid and click the button Layout button.

Change the drawing width and height to see how the layout behaves with a different layout area.


Stack Layout Example

C# Stack Layout Example Code for Nevron Diagram for Blazor
Language: C#

using Nevron.Nov;
using Nevron.Nov.DataStructures;
using Nevron.Nov.Diagram;
using Nevron.Nov.Diagram.Layout;
using Nevron.Nov.Diagram.Shapes;
using Nevron.Nov.Dom;
using Nevron.Nov.Editors;
using Nevron.Nov.Graphics;
using Nevron.Nov.Layout;
using Nevron.Nov.UI;
using Nevron.Nov.Windows.Forms;
using System;
using System.Windows.Forms;

namespace NovWinFormsProject
{
	public partial class Form1 : Form
	{
		#region Constructors

		public Form1()
		{
			InitializeComponent();

			// Set form title
			Text = "NOV WinForms - NStackLayoutExample";

			// Create the NOV example and its controls
			NWidget exampleContent = CreateExampleContent();
			NWidget exampleControls = CreateExampleControls();
			if (exampleControls != null)
			{
				exampleControls.PreferredWidth = 300;
			}

			// Place the example and its controls in a pair box
			NPairBox pairBox = new NPairBox(exampleContent, exampleControls);
			pairBox.FillMode = ENStackFillMode.First;
			pairBox.FitMode = ENStackFitMode.First;
			pairBox.Margins = new NMargins(NDesign.HorizontalSpacing, NDesign.VerticalSpacing);

			// Host the example in the form
			NNovWidgetHost host = new NNovWidgetHost(pairBox);
			host.Dock = DockStyle.Fill;
			Controls.Add(host);
		}

		#endregion

		#region Example

		public NWidget CreateExampleContent()
		{
			// Create a simple drawing
			NDrawingViewWithRibbon drawingViewWithRibbon = new NDrawingViewWithRibbon();
			m_DrawingView = drawingViewWithRibbon.View;

			m_DrawingView.Document.HistoryService.Pause();
			try
			{
				InitDiagram(m_DrawingView.Document);
			}
			finally
			{
				m_DrawingView.Document.HistoryService.Resume();
			}

			return drawingViewWithRibbon;
		}
		public NWidget CreateExampleControls()
		{
			m_Layout.Changed += OnLayoutChanged;

			NStackPanel stack = new NStackPanel();

			// layout area size -> controls either page width or height depending on layout direction
			NGroupBox layoutAreaGroupBox = new NGroupBox("Layout Area Size");
            stack.Add(layoutAreaGroupBox);

            NSlider sizeSlider = CreateSlider(m_DrawingView.ActivePage.Width, 100, 1000, (args) =>
			{
				SetPageSize((double)args.NewValue);
            });
			layoutAreaGroupBox.Content = sizeSlider;

			m_Layout.AddValueChangedEventHandler(NStackLayout.DirectionProperty, (args) =>
			{
                SetPageSize(sizeSlider.Value);
            });

            // property editor
            NEditor editor = NDesigner.GetDesigner(m_Layout).CreateStandaloneEditor(m_Layout);
			stack.Add(new NGroupBox("Properties", editor));

			NButton arrangeButton = new NButton("Arrange Diagram");
			arrangeButton.Click += OnArrangeButtonClick;
			stack.Add(arrangeButton);

			// items stack
			NStackPanel itemsStack = new NStackPanel();

			// NOTE: For Cells layout we provide the user with the ability to add shapes with different sizes so that he/she can test the layouts
			NButton addSmallItemButton = new NButton("Add Small Shape");
			addSmallItemButton.Click += OnAddSmallItemButtonClick;
			itemsStack.Add(addSmallItemButton);

			NButton addLargeItemButton = new NButton("Add Large Shape");
			addLargeItemButton.Click += OnAddLargeItemButtonClick;
			itemsStack.Add(addLargeItemButton);

			NButton addRandomItemButton = new NButton("Add Random Shape");
			addRandomItemButton.Click += OnAddRandomItemButtonClick;
			itemsStack.Add(addRandomItemButton);

			NButton removeAllItemsButton = new NButton("Remove All Shapes");
			removeAllItemsButton.Click += OnRemoveAllItemsButtonClick;
			itemsStack.Add(removeAllItemsButton);

			stack.Add(new NGroupBox("Items", itemsStack));

			return stack;
		}
		public string GetExampleDescription()
		{
			return @"

The stack layout is a directed constrained cells layout, which stacks the cells in horizontal or vertical order. Depending on the layout direction the layout is constrained by either width or height.

The most important properties of this layout are:

  • Direction - determines the direction in which the layout arranges adjacent cells.
  • HorizontalContentPlacement and VerticalContentPlacement - determine the default placement of the cell content in regards to the X or the Y dimension of the cell bounds.
  • HorizontalSpacing and VerticalSpacing - determine the minimal spacing between 2 cells in horizontal and vertical direction respectively.
  • FillMode - when the size of the content is smaller than the container size the FillMode property is taken into account. Possible values are:
    • None - no filling is performed
    • Equal - all shapes are equally inflated
    • Proportional - shapes are inflated proportionally to their size
    • First - shapes are inflated in forward order until content fills the area
    • Last - shapes are inflated in reverse order until content fills the area
    In all cases the maximal size constraints of each shape are not broken.
  • FitMode - when the size of the content is larger than the container size the FitMode property is taken into account. Possible values are:
    • None - no fitting is performed
    • Equal - all shapes are equally deflated
    • Proportional - shapes are deflated proportionally to their size
    • First - shapes are deflated in forward order until content fits the area
    • Last - shapes are deflated in reverse order until content fits the area
    In all cases the minimal size constraints of each shape are not broken.

To experiment with their behavior just change the properties of the layout in the property grid and click the button Layout button.

Change the drawing width and height to see how the layout behaves with a different layout area.

"; } /// /// Gets the relevant documentation links for the example /// /// public (string Name, string Url)[] GetDocumentationUrls() { return new[] { ("Stack Layout", "https://www.nevron.com/docs/openvision/stack-layout.html"), ("Layouts Overview", "https://www.nevron.com/docs/openvision/diagram-drawing-layouts-overview.html"), ("Graph Regions and Regions Layouts", "https://www.nevron.com/docs/openvision/diagram-graph-regions-and-region-layouts.html"), ("Layouts Overview", "https://www.nevron.com/docs/openvision/layouts-overview.html"), }; } private void InitDiagram(NDrawingDocument drawingDocument) { m_Factory = new NBasicShapeFactory(); // Hide ports drawingDocument.Content.ScreenVisibility.ShowPorts = false; // Create some shapes NPage activePage = drawingDocument.Content.ActivePage; NBasicShapeFactory basicShapes = new NBasicShapeFactory(); for (int i = 0; i < 20; i++) { NShape shape = basicShapes.CreateShape(ENBasicShape.Rectangle); activePage.Items.Add(shape); } // Arrange diagram ArrangeDiagram(drawingDocument); // Fit page drawingDocument.Content.ActivePage.ZoomMode = ENZoomMode.Fit; } private NSlider CreateSlider(double value, double min, double max, DNFunction valueChanged) { NSlider slider = new NSlider(value, min, max); slider.TicksPlacement = ENTicksPlacement.None; slider.ValueChanged += valueChanged; return slider; } private void SetPageSize(double size) { if (m_Layout.Direction == ENHVDirection.LeftToRight || m_Layout.Direction == ENHVDirection.RightToLeft) { m_DrawingView.ActivePage.Height = size; } else { m_DrawingView.ActivePage.Width = size; } ArrangeDiagram(m_DrawingView.Document); } #endregion #region Implementation /// /// Arranges the shapes in the active page. /// /// private void ArrangeDiagram(NDrawingDocument drawingDocument) { // get all top-level shapes that reside in the active page NPage activePage = drawingDocument.Content.ActivePage; NList shapes = activePage.GetShapes(false); // create a layout context and use it to arrange the shapes using the current layout NDrawingLayoutContext layoutContext = new NDrawingLayoutContext(drawingDocument, activePage); m_Layout.Arrange(shapes.CastAll(), layoutContext); // size the page to the content size activePage.SizeToContent(); } private NShape CreateShape() { return m_Factory.CreateShape(ENBasicShape.Rectangle); } private void OnAddSmallItemButtonClick(NEventArgs args) { NShape shape = CreateShape(); shape.Width = 25; shape.Height = 25; m_DrawingView.ActivePage.Items.Add(shape); ArrangeDiagram(m_DrawingView.Document); } private void OnAddLargeItemButtonClick(NEventArgs args) { NShape shape = CreateShape(); shape.Width = 60; shape.Height = 60; m_DrawingView.ActivePage.Items.Add(shape); ArrangeDiagram(m_DrawingView.Document); } private void OnAddRandomItemButtonClick(NEventArgs args) { int range = 30; Random rnd = new Random(); NShape shape = CreateShape(); shape.Width = rnd.Next(range) + range; shape.Height = rnd.Next(range) + range; m_DrawingView.ActivePage.Items.Add(shape); ArrangeDiagram(m_DrawingView.Document); } private void OnRemoveAllItemsButtonClick(NEventArgs args) { m_DrawingView.Document.StartHistoryTransaction("Remove All Items"); try { m_DrawingView.Document.Content.ActivePage.Items.Clear(); } finally { m_DrawingView.Document.CommitHistoryTransaction(); } } #endregion #region Event Handlers private void OnLayoutChanged(NEventArgs arg) { ArrangeDiagram(m_DrawingView.Document); } protected virtual void OnArrangeButtonClick(NEventArgs arg) { ArrangeDiagram(m_DrawingView.Document); } #endregion #region Fields private NDrawingView m_DrawingView; private NStackLayout m_Layout = new NStackLayout(); private NBasicShapeFactory m_Factory; #endregion #region Static Methods #endregion #region Constants #endregion #region Nested Types #endregion } }

Download a fully functional C# (.cs) Stack Layout Example for Blazor Solution